Synergistic Research
ECT Resonator
Electronic Circuit Transducer

Excl. TAX € 68.60
Incl. 21 % TAX € 83.00

Quantity

Clear

30 Day money – back guarantee!

Electronic Circuit Transducer
Tiny devices with high impact
Cleans up high frequency noise
Lowers noise floor
Improves resolution
Significant increase in sound stage scale
Improved mid-range clarity
Enhanced low frequency control
Applicable to all kinds of electronic parts and chassis
Weight 0
Dimensions Ø10×8 mm

Tune to taste

You now have the ability to elevate the performance of any piece of audio gear with little more than a screwdriver, or an allen wrench, at home. Simply apply a few ECTs in each of your system’s components for a significant and cost effective improvement in sound quality.

ECTs clean up high frequency noise that otherwise distort harmonic structures within the music signal. When ECTs are placed on or in an electronic device UEF nano-particles within the ECTs are excited by the components EM fields and in turn are balanced by the ECTs reaction through the process of inductive coupling.

These tiny devices look identical to the HFTs and have black painted cylinders and red waveguides. They significantly improve the function of D/A converters, fuses, IC chips, vacuum tubes, capacitors, analog and digital cables and transformers. Now is your chance to experience the magic of UEF applied directly to your components and cables.

There might be situations where you don’t have access to the inside of your components, but don’t worry, in the manual are some suggestions on how to apply the ECTs to the outside of your component’s chassis, with an equally impressive performance upgrade to your components.

With ECTs you hear music with a lower noise floor, higher resolution and a significant increase in sound stage scale with improved mid range clarity and low frequency control. In fact once you place ECTs in your system, you’ll never want to take them out.

Reviews:
Synergistic Research ECT-Electronic Circuit Transducer by Steven Plaskin @ Audiostream.com
“With the ECTs I immediately noticed better definition in the bass with more impact and a superior visceral grip to the bass. Again, the soundstage opened up with increased focus and definition of the other instruments.”

Raymond’s practical experience:
“I have installed 10 ECTs on my McIntosh MX 135 Preamp, and the sound is so incredible. I never imagined that something so small could make such a big change in the way you listen to music and movies. I’ve tried them on my anthem AVM 60 also, and the sound is amazing. On my McIntosh, the bass is so powerful and clean. It’s beyond anything I heard before. And yet when the bass is delicate on the recording, all of the instruments in the music sound like real instruments. I love synergistic research products, and I have to say, after putting ECTs in my system, I just can’t live without them. I also put 5 in my 4k Blu-Ray Player, huge change.
I’ve tried them on cables and subwoofers, the change is amazing. Ted Denney is the Tony Stark of the audio world. We need more people like him that can change our world. In my opinion, he makes things we just can’t live without.”

Install and listening observations:
New Synergistic Research Technology – Uniform Energy Field Technology @ AVShowrooms.com

ECT Placement Guide

Vacuum tubes
Fuses
Transformers
IC chips
Cables
Chassis

ECT Electronic Circuits Transducer- System Components
ECT has been engineered to balance close proximity electromagnetics fields in electronic circuit components and cables significantly improving performance to unprecedented levels. CAUTION: Turn off and unplug component for at least 30 minutes before disassembly.

Vacuum Tube Placement: Apply a small amount of white tack or glue dot to the bottom of the ECT and affix near the base of the tube socket in an upright position.
DO NOT PLACE DIRECTLY ON TUBE

Fuse Placement: Apply a small amount of white tack or glue dot to the bottom of the ECT and affix to the fuse holder in an upright position.

Transformer Placement: Apply a small amout of white tack or glue dot to the bottom of the ECT and affix to the transformer in an upright position.

IC Chip Placement: Apply a small amount of white tack or glue dot to the bottom of the ECT and affix to the top of the IC Chip in an upright position.

Cable Placement: Apply a small amount of white tack or glue dot to the bottom of the ECT and affix to the signal sending end of cable in an upright position.

Chassis Placement: Apply a small amount of white tack or glue dot to the bottom of the ECT and affix to the bottom of the chassis in an upright position.

PLACEMENT INTRUCTIONS FOR INCLUDED ECT

Electronic Circuits Transducer

For maximum improvement place the ECT facing upwards, directly on the connector (XLR, RCA, USB, etc.) of the signal sending side of your signal cable. For temporary placement, apply a small amount of the white tack to a clean bottom surface of the ECT. Once you have found your ideal placement, replace the white tack with a glue dot and reapply the ECT for semi-permanent placement.