WA-Quantum
Loudspeaker Chip
Incl. 21 % TAX € 42.00
This chip should be attached to the loudspeakers cabinet. Best position is near the crossover. When desired, multiple chips can be attached, even invisible at the back or the bottom. Soon after application, the effect will be a more dynamic, natural and spatial sound, as well as more clearness. Dimensions are 80×40 mm.
Hard to believe, easy to hear
The German based WA-Quantum is a manufacturer of high technology products. Among their products is a line of bioenergetic ‘chips’, which they programmed to improve the efficiency of current flow and signal transmission in all audio and video devices. Special chips are available for loudspeakers, hifi units, cables, fuses, transformers, batteries, capacitors, resistors, semiconductors, power applications, turntables and even musical instruments (acoustic as well as electrical) and mobile devices. A small number of chips is sufficient to transform your system and bring it to a higher performance level!
In each case the chip is mounted on an adhesive backing which can be attached to the device. The chips are programmed for their specified applications.
- Improves all audio/video components
- Easy to apply, in less than a minute
- Great benefits for a small investment
- Available for 12 dedicated appliances
7 reviews for WA-Quantum
Loudspeaker Chip
Add a review
Related products
Dhr. Brouwer from the Netherlands (translated by JvP) –
The speaker chip is simply unbelievable. According to the manufacturer, it does not make a difference where you put the chip, but I have experience to the contrary. Close by the drivers, the sound becomes detailled and analytical, whereas a chip at the bottom of the cabinet yields a full bodied sound. My preference is the latter. Soundwise, my speakers now seem at least one model bigger.
A Dutch customer who prefers to be anonymous (translated by JvP) –
After fixing the cable chips at the cable ends going into my loudspeakers, I was less able to locate the speakers. However, the warm sound of my system was partially lost also. Several weeks later, the warmth of the sound had been re-established; also, there is more musical information now and the sound is even less attached to the speaker cabinets. Just more liquid and organic.
Peter from the Netherlands –
After fixing the cable chips at the cable ends going into my loudspeakers, I was less able to locate the speakers. However, the warm sound of my system was partially lost also. Several weeks later, the warmth of the sound had been re-established; also, there is more musical information now and the sound is even less attached to the speaker cabinets. Just more liquid and organic.
Henk Verschuren from the Netherlands –
Having attached the Loudspeaker Chips, not much seemed to change at first, as far as the audiophile parameters are concerned. Listening somewhat longer, I discovered that suddenly an almost real singer stood in front of me, with her band nicely positioned behind her. The music was much more liquid; after a few days I furthermore noticed more “rolling” bass notes and more detail in the mids and highs. The focussing within the soundstage has become much more accurate.
Peacock Audio (Dutch delaer) –
First, I placed the Speaker Chips on top of my loudspeaker cabinets, without agglutinating yet. And gosh, at once, a very obvious audible improvement emerged: more composure and spatial information and a clear increase in layering of the soundstage, refinement and overall musicality. More nuances of musical instruments could be heard because the sound had become much cleaner. Any person who doesn’t hear an enormous improvement as a result of the WA-Quantum Chips, is entitled to have his ears examined at my cost!
Teunis –
Heb de chip op de luidsprekerkast geprobeerd en ook op de luidsprekers units aan de binnenkant van de kast. Het laatste klonk bij mij het beste en ik heb toen op elke luidspreker unit een chip geplaast. Het klinkt nu geweldig goed.
anonymous –
ordered them from Germany and installed them on the left channel of my audio setup to compare with the un-modified right channel. it seems the speakers are less loud and there seems to be a slight scoop in the midrange.
i tested it with a mono 78rpm on my custom build turn table, to ensure the same signal goes into both sides of my system.
something like the BBE sonic Maximiser has way more effect on depth while retaining the volume level.