Acoustic Revive
RCI-3 HK
Cable insulator

Allows electricity to flow more smoothly, greatly reducing resonance and radiation noise

The purpose of a cable insulator is to prevent cables from being influenced by vibrations from the speaker. Most conventional cable insulators (or stabilizers) are made from a single material. So even if the cable is lifted from the floor, they will generate their own resonance which will inevitably induce coloration.

At Acoustic Revive, many materials were tested, as a result of these tests, a combination of top quality maple and ebony was chosen, which makes the sound natural and free from coloration. The cable contact surface is covered with special vibration control material for superb resonance control.

In addition, inside the insulator is a blend of natural ores which absorb electromagnetic waves and radiated noise from the cable. Because of its combination of resonance control and noise absorption abilities, the RCI-3 will dramatically improve sound in a manner never achieved before. Noise is dramatically reduced and sound stage and imaging are more focused and three dimensional. The sound will become smoother as well.

Using the RCI-3 on one power cable has a huge effect! Using more and more RCI-3 to lift cables up from the floor or the rack will improve transparency and make the sound very three dimensional, but already using just one RCI-3 on a power cable will have a great effect. Power cables are affected not only by speaker vibrations, but also by the electric power flowing through the cable itself, which leads to loss in voltage and distortion.

Power cables release strong radiation noise which badly affects the surrounding cables and equipment. Using the RCI-3 on power cables allows electricity to flow more smoothly, greatly reducing resonance and radiation noise. If you are planning to use just one RCI-3, start with the cable feeding your power amplifier.

Effective even if all cables are lifted! Many audiophiles already use short cables that don’t touch the floor or employ some method to keep the cables floated off of the floor or rack. Even in these cases, using the RCI-3 is very effective.

This is because the resonance control structure and electromagnetic wave absorbing characteristics of the RCI-3 are very powerful. You can expect a dramatic sound quality improvement by using the RCI-3 Cable Insulator.

Principle / structure:
The purpose of cable insulators is to lift various connecting cables from the floor or rack to avoid speakers and external vibrations. However, most cable insulators and cable stabilizers are made of a single material, and although they have the effect of avoiding vibration, because they are made of a single material, the insulator itself resonates, and the reproduced sound has a habit of the material. There were many products that were available. RCI-3H is a further evolution of the popular RCI-3, and is a new combination of the finest hickory and mahogany as a material that realizes an organic and natural tone.

In addition, RCI-3H contains a variety of natural ore blends that have the effect of absorbing electromagnetic waves and radiant noise generated from cables. The electromagnetic wave / noise absorption effect of this natural ore blend and the excellent vibration damping structure dramatically improve the S / N ratio, reproduce a vast sound field with deep depth, sharp and three-dimensional sound image localization, and organic and smooth. You can expect an overwhelming improvement in sound quality that goes beyond the dimensions of many cable insulators, such as a dynamic tone and texture, and a dynamic and energetic feeling.

How to use:
RCI-3H can greatly improve transparency, three-dimensionality, and texture by floating all the places where the cable is in contact, such as the floor and rack shelves, but only use one place for the power cable. But it has a huge effect.

This is because the power cable always vibrates slightly due to the flow of power in addition to the vibration from the speaker, causing voltage loss and distortion.

In addition, strong radiation noise is generated from the power cable, which has a serious effect on the surrounding cables and equipment.

Since RCI-3H strongly suppresses micro-vibration due to AC current and radiation noise generated from the power cable itself, a kind of rectifying effect is created, and the S / N ratio and distortion rate can be dramatically improved. is. I’m sure some users will connect all the connection cables in the shortest distance, or somehow lift the cables off the floor or rack. Even if the RCI-3H is used in such a state, it can be expected to greatly improve the sound quality due to its excellent damping effect and electromagnetic wave absorption effect.

Reviews:
Acoustic Revive REM-8 EMF Canceler and RCI-3 Cable Insulator @ highfidelityreview.com
The Acoustic Revive Chronicles – Single Core speaker cables, RCA interconnects, and the RCI-3 Cable Insulators by Jeff Day @ positive-feedback.com